COMPACT
Series
Rated torque
8700 Нм
for installation of one screw pile 108х3000
7-15 min
on request *
* Price for the basic configuration
COMPONENTS OF BASIC CONFIGURATION
-
HYDRAULIC POWER UNIT "COMPACT" series ------------------ 1pc.
-
HYDRAULIC DRIVE HEAD -------------------------------------------- 1pc.
-
HIGH PRESSURE HOSE WITH QUICK COUPLERS (L=5m) --- 2pcs.
-
ADAPTOR (to connect screw pile) -------------------------------- 1pc.
-
USER MANUAL ------------------------------------------------------- 1pc.
HYDRAULIC POWER UNIT "COMPACT" series
SPECIFICATIONS
Flow ------------------------------------------------------------------------ 22 liters / min
Maximum pressure ------------------------------------------------------------- 15 MPa
Working fluid temperature -------------------------------------------- Max. + 70 ° С
Oil tank capacity ----------------------------------------------------------------- 40 liters
Fuel tank capacity --------------------------------------------------------------- 6.7 liters
Hydraulic system volume ---------------------------------------------------- Max . 40L
Filtration system ------------------------------------------------- Inorganic microfiber
Engine ----------------------------------------------- Single-cylinder, 4-stroke, 15 hp
Operating conditions ---------------------------------------------- 15 ° C to + 30 ° C
Average fuel consumption ----------------------------------------------- 374 g / kWh
Dimensions (LхWхH) ---------------------------------------------- 700х830х700 mm
Weight -------------------------------------------------------------------------------- 80 kg
* Hydraulic power unit can be purchased separately.
For pricing, availability and other questions please check with our sales department - Ask a Question
* The hydraulic power unit can be equipped with a Japanese HONDA engine 12 hp (3 year warranty).
The cost of this service check with our sales department - Ask a Question
HYDRAULIC DRIVE HEAD
SPECIFICATIONS
Rated torque (not less than) ------------------------------------------------- 8700 Nm
Inlet pressure (nominal) ------------------------------------------------------- 16 MPa
Inlet pressure (maximum) ----------------------------------------------------- 20 MPa
Weight (without holding bracket) --------------------------------------------- 37.5 kg
The temperature range of the oil ----------------------- from + 15 ° С to + 70 ° С
Interval of ambient temperatures ----------------------- from -40 ° С to + 40 ° С
Speed ----------------------------------------------------------------------------- 3-5 rpm
The high-torque low-speed hydraulic motor allows safely and efficiently erecting screw piles on objects of any degree of complexity.
* Hydraulic drive available separately.
For pricing, availability and other questions please check with our sales department - Ask a Question
* This unit can be equipped with a hydraulic drive:
-
Low rated torque - 5000 Nm
-
With high rated torque - 11000 Nm
Specify details at our sales department - Ask a Question
* Additionally available
-
Torque bar (additional) ----------------------------------------------------------------------- on request
HIGH PRESSURE HOSES WITH QUICK COUPLERS
HIGH PRESSURE HOSES
The basic configuration of equipment includes 2 high-pressure hoses with a length of 5 m each. They are designed to connect the hydraulic power unit with the working mechanism (hydraulic drive head).
By means of the high-pressure hoses the working fluid (oil) flows from the hydraulic power unit to the hydraulic drive head.
During the operation, especially on difficult soils, high-pressure hoses are subjected to a high load associated with the increase in pressure of the working fluid flowing inside them; therefore in our products we use high-pressure hoses only of a reliable manufacturer with a 2-fold safety factor.
High-pressure hoses are equipped with quick couplings
QUICK COUPLERS
Quick couplers gives the ability of the quick connection of hydraulic power unit to the hydraulic drive head. This connection also does not let high-pressure hoses to twist. The fact of twisting is generally observed where there are no connections of this type.
Quick couplers is installed in 2 places - on the hydraulic power unit and at the hydraulic drive head.
* At the request of the customer the length of the high pressure hoses can be increased. Longer hoses let to make the installation of several piles at once, without moving hydraulic power unit.
-
Additional length of high pressure hose --------------------------------------- on request
ADAPTOR
Adapter
Adapter is designed to transfer torque from the hydraulic drive head to the pile.
Piles with a diameter of 108 mm are most popular, that is the reason why this adapter is in the basic configuration of the equipment.
ADAPTOR is fastened to the flange of the spline shaft of the hydraulic drive head with a bolted connection. If you need to mount piles of different diameters on the site this type of connection gives you the ability to change one adapter to another quickly and easily.
PIN
Pin is an element that fixes the pile relative to the adaptor.
The pin is very durable and able to withstand even the highest loads.
There are several holes on the adaptor, so that it is always possible to install a fixing pin, regardless of where the mounting hole on the body of the pile is located.
* YOU CAN BUY ADDITIONALLY
-
Adaptor (to connect 57mm screw pile) ---------------------------------------------------- on request
-
Adaptor (to connect 76mm screw pile) ---------------------------------------------------- on request
-
Adaptor (to connect 89mm screw pile) ---------------------------------------------------- on request
-
Adaptor (to connect 133mm screw pile) --------------------------------------------------- on request
-
Adaptor (to connect square pipe 50x50 mm) -------------------------------------------- on request
-
Adaptor (to connect "Krinner" screw pile) ------------------------------------------------ on request
USER MANUAL
The package always includes
Passport and User Manual.
